Juniper JUNOSE SOFTWARE FOR E SERIES 11.0.X - BGP AND MPLS CONFIGURATION GUIDE 2009-12-30 Configuration Manual page 389

Table 53: show mpls rsvp Output Fields (continued)
Field Name
Flags
TTC
Policy Object
Unknown Objects
PSB Flag InUse
PSB Flag Deleted
PSB Flag NonRsvp
PSB Flag
RouteChangeNotify
PSB Flag EroChanged
PSB Flag NextHopChanged
PSB Flag
RtNextHopChanged
PSB Flag
EgressStatusChanged
PSB Flag QosChanged
PSB Flag LabelChanged
PSB Flag
ResvRefreshNeeded
PSB Flag
PathRefreshNeeded
PSB Flag RroRequired
PSB Flag Egress
PSB Flag PathRefreshSent
PSB Flag EgressFilterFF
PSB Flag
QosCorrectionNeeded
PSB Flag IsPathTrigger
Monitoring RSVP Path State Control Blocks, Reservation State Control Blocks, or Sessions
Field Description
One or more of the IngressReRoute (the ingress router can reroute
the LSP), Local Protection (routers can use local repair mechanism
to fix the LSP; this fix might violate the explicit route object
associated with the LSP), and MergingPermitted (LSPs can be
merged) flags
Indicates presence of the traffic trunk classifier object
Indicates presence of the policy object
Indicates presence objects not defined by the RSVP specification
PSB in use
PSB deleted
Non-RSVP hop present
Route change notification received
Explicit route object changed
Next hop has changed
Routing table next hop changed
PSB egress status has changed
QoS characteristics have changed
Label has changed
Reservation refresh needed
Path refresh needed
Record route object required
Session is egress
Path refresh sent
Egress filter reservation style Fixed Filter
QoS correction needed
Has path refresh been triggered
Chapter 4: Monitoring MPLS
353