Monitoring Bgp Next Hops For Vpls - Juniper JUNOSE SOFTWARE FOR E SERIES 11.0.X - BGP AND MPLS CONFIGURATION GUIDE 2009-12-30 Configuration Manual

Table 94: show ip bgp l2vpn Output Fields (continued)
Related Topics

Monitoring BGP Next Hops for VPLS

Display information about BGP next hops in the L2VPN address family or in the VPLS
Purpose
address family.
To display next hop information that matches the specified indirect next-hop address
Action
(2.2.2.2) in the L2VPN address family:
host1#show ip bgp l2vpn all next-hops 2.2.2.2
Indirect next-hop 2.2.2.2
Field Name Field Description
Status codes Status codes for the route, listed before the Prefix:
Prefix Route prefix in the format siteID:blockOffset
Peer IP address of the peer from which the route was learned
Next-hop (or Next hop IP IP address of the next router that is used when a packet is
address) forwarded to the destination network
MED Multiexit discriminator for the route
LocPrf Local preference for the route
Weight Weight of the route
Origin Origin of the route
AS path AS path through which this route has been advertised
Extended communities Description of the extended communities associated with this route.
Includes route target, community type, encapsulation, control word
and sequencing use, L2VPN link MTU, layer 2 D-bit (Site-is-Down)
setting.
show ip bgp l2vpn
show ip bgp l2vpn vpls
> best route
* invalid route
s suppressed route
d dampened route
r rejected route
a auto-summarized route
m multihomed backup route; not used to trigger pseudowire
Monitoring BGP Next Hops for VPLS
Chapter 11: Monitoring VPLS
629