Table of Contents
Advertisement
Table 37: show ldp graceful restart Output Fields (continued)
Related Topics
Monitoring Interfaces That are Synchronizing with LDP
Display information about interfaces that are synchronizing with LDP or the specified
Purpose
interface that is synchronizing with LDP.
To display information about interfaces synchornizing with LDP:
Action
host1#show ldp igp-sync
Atm 0/0:
Table 38 on page 325 lists the show ldp igp-sync command output fields.
Meaning
Table 38: show ldp igp-sync Output Fields
Field Name
Field Description
Reconnect Time
Locally configured value for reconnect time, in seconds
Recovery Time
Locally configured value for recovery time, in seconds
Max Recovery Time
Locally configured value for max-recovery timer, in seconds
Neighbor Liveness Timer
Locally configured value for neighbor-liveness timer, in seconds
Peer
Address, state, and LDP graceful restart state for neighbor
show ldp graceful-restart
LDP configured;
SYNC enabled.
SYNC status: sync achieved; peer reachable.
IGP holddown time: infinite.
Peer LDP Ident: 10.130.0.1:0
IGP enabled: OSPF 1
Field Name
Field Description
LDP
State of LDP, configured, auto-configured, or not configured
SYNC status
State of synchronization, enabled or disabled
IGP holddown time
Value of IGP hold down time, infinite or number of milliseconds
Peer LDP Ident
IP address of LDP peer
IGP enabled
IGP protocol
Monitoring Interfaces That are Synchronizing with LDP
Chapter 4: Monitoring MPLS
325
Advertisement
Table of Contents
Troubleshooting
