Juniper JUNOSE SOFTWARE FOR E SERIES 11.0.X - BGP AND MPLS CONFIGURATION GUIDE 2009-12-30 Configuration Manual page 672

JUNOSe 11.0.x BGP and MPLS Configuration Guide
Table 98: show vpls connections Output Fields (continued)
Related Topics
636
Monitoring VPLS-Specific Settings
Field Name Field Description
Remote PE IP address of the remote VPLS edge (VE) router, which is analogous
to the remote provider edge (PE) router in a BGP/MPLS VPN
configuration
In-label Incoming MPLS label from the remote site
Out-label Outgoing MPLS label used to reach the remote site
MPLS NH Idx MPLS next-hop index number that corresponds to the outgoing
MPLS label
Up-down Time Time since the last state change for this VPLS connection
show vpls connections