Juniper JUNOSE SOFTWARE FOR E SERIES 11.0.X - BGP AND MPLS CONFIGURATION GUIDE 2009-12-30 Configuration Manual page 110

JUNOSe 11.0.x BGP and MPLS Configuration Guide
match ip next-hop
match level
match metric
match metric-type
match route-type
74
Configuring BGP Routing Policy
Use to match any routes that have a next-hop router address passed by the
specified access list, prefix list, or prefix tree.
Example
host1(config)#route-map nyc1 permit 10
host1(config-route-map)#match ip next-hop 5 192.54.24.1
Use the no version to delete the match clause from a route map or a specified
value from the match clause.
See match ip next-hop.
Use to match routes for the specified type.
Example
host1(config)#route-map nyc1 permit 10
host1(config-route-map)#match level level-1
Use the no version to delete the match clause from a route map or a specified
value from the match clause.
See match level.
Use to match a route for the specified metric value.
Example
host1(config)#route-map nyc1 permit 10
host1(config-route-map)#match metric 10
Use the no version to delete the match clause from a route map or a specified
value from the match clause.
See match metric.
Use to match a route for the specified metric type.
Example
host1(config)#route-map nyc1 permit 10
host1(config-route-map)#match metric-type external
Use the no version to delete the match clause from a route map.
See match metric-type.