Monitoring Bgp - Juniper JUNOSE SOFTWARE FOR E SERIES 11.0.X - BGP AND MPLS CONFIGURATION GUIDE 2009-12-30 Configuration Manual

JUNOSe 11.0.x BGP and MPLS Configuration Guide

Monitoring BGP

Use the show commands in this section to monitor BGP activity.
NOTE: The E120 router and E320 router output for monitor and show commands
is identical to output from other E Series routers, except that the E120 and E320
router output also includes information about the adapter identifier in the interface
specifier (slot/adapter/port).
Use the baseline ip bgp command to set the baseline on all BGP statistics.
You can use the output filtering feature of the show command to include or exclude
lines of output based on a text string you specify. See JUNOSe System Basics
Configuration Guide, for details.
Use the debug ip bgp command to get information about problems with BGP or the
network.
baseline ip bgp
158
Monitoring BGP
The following three items apply to the test ip bgp neighbor command only:
The address-family identifier for the route is the same as is used for identifying
the neighbor.
If you do not specify a route, the test is performed for all routes associated
with the address-family identifier.
Specifying only an address and mask without a route distinguisher causes
all routes sharing the address and mask to be taken into account. Specifying
only an address causes a best match to be performed for the route.
If you completely specify a route with IP address, mask, and route distinguisher,
the command displays detailed route information. Otherwise only summary
information is shown. Use the fields option to select particular fields of interest.
If you specify a BGP peer group by using the peerGroupName argument, all the
members of the peer group inherit the characteristic configured with this
command unless it is overridden for a specific peer.
You can set a weight value for inbound routes filtered with a filter list.
Example
host1#test ip bgp neighbor 10.12.54.21 advertised-routes distribute-list boston5
fields all
There is no no version.
See test bgp ipv6 neighbor.
See test ip bgp neighbor.