Juniper JUNOSE SOFTWARE FOR E SERIES 11.0.X - BGP AND MPLS CONFIGURATION GUIDE 2009-12-30 Configuration Manual page 200

Software for e series routing platforms bgp and mpls configuration guide
Table of Contents

Advertisement

JUNOSe 11.0.x BGP and MPLS Configuration Guide
164
Monitoring BGP
host1:pe1#show ip bgp route-target signaling network
Prefix
Weight Route-map
102:111:34/96
1111111111:23:1/96
host1:pe1#show ip bgp route-target signaling network 102:111:34
Prefix
Weight Route-map
102:111:34/96
Example 8 Error message generated when a prefix less than 32 or greater than
96 is specified for the RT-MEM-NLRI
host1#show ip bgp route-target signaling 100:100:1/31
% Invalid route-target membership NLRI
You can use the field options to display filtered information about a specified
network or all networks in the BGP routing table. Only the fields that you specify
are displayed, except that the Prefix field is always displayed.
The stale field option shows which routes are stale due to peer restart.
Examples
host1:5#show ip bgp fields peer next-hop next-hop-cost
Prefix
Peer
11.11.11.11/32
3.3.3.3
11.11.11.11/32
4.4.4.4
22.22.22.22/32
3.3.3.3
22.22.22.22/32
4.4.4.4
33.33.33.33/32
3.3.3.3
44.44.44.44/32
4.4.4.4
55.55.55.55/32
0.0.0.0
66.66.66.66/32
6.6.6.6
77.77.77.77/32
57.57.57.7
88.88.88.88/32
57.57.57.7
host1:pe1#show ip bgp fields best peer next-hop stale
Prefix
> 10.22.22.1/32
> 10.22.22.2/32
> 10.22.22.3/32
> 10.33.33.1/32
> 10.33.33.2/32
> 10.33.33.3/32
You can use the default-fields route command to specify default fields to be
displayed by subsequently issued show ip bgp commands.
If you filter the display with field options, the usual introductory information
about BGP attributes is displayed only if you issue the intro fields option.
Field descriptions for introductory fields displayed only when the intro keyword
has been issued
^
Next-hop
3.3.3.3
4.4.4.4
3.3.3.3
4.4.4.4
3.3.3.3
4.4.4.4
0.0.0.0
6.6.6.6
57.57.57.7
57.57.57.7
Stale Peer
Next-hop
stale 10.12.12.2
10.12.12.2
stale 10.12.12.2
10.12.12.2
stale 10.12.12.2
10.12.12.2
10.13.13.3
10.13.13.3
10.13.13.3
10.13.13.3
10.13.13.3
10.13.13.3
Backdoor
No
No
Backdoor
No
Next-hop-cost
Unreachable
Unreachable
Unreachable
Unreachable
Unreachable
Unreachable
0
Unreachable
1
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose

Table of Contents