One-Way Access Using A Tcp Flag In An Acl - NETGEAR GSM7228PS Software Administration Manual

ProSafe 7000 Managed Switch Release 8.0.3
• In the ACL ID list, select 10.
• In the Sequence Number field, enter 1.
c. Click Unit 1. The ports display.
d. Click the gray box under port 2. A check mark displays in the box.
e. Click Apply to save the settings.

One-Way Access Using a TCP Flag in an ACL

This example shows how to set up one-way Web access using a TCP flag in an ACL. PC 1
can access FTP server 1 and FTP server 2, but PC 2 can access only FTP server 2.
Port 0/13
192.168.100.2
FTP server 1
Layer 2 switch
Port 0/35
PC 1
Figure 15. One-Way Web access using a TCP flag in an ACL
CLI:Configure One-Way Access Using a TCP Flag in an ACL
This is a two-step process:
• Step 1: Configure the Switch
• Step 2: Configure the GSM7352S
Step 1: Configure the Switch
(See Figure 15, One-Way Web access using a TCP flag in an
Port 1/0/48
Port 0/44
on page 117
on page 119
Port 1/0/24
192.168.40.2
FTP server 2
Layer 3 switch
Port 1/0/25
PC 2
ACL.)
Chapter 10. ACLs | 117