NETGEAR GSM7228PS Software Administration Manual page 283

ProSafe 7000 Managed Switch Release 8.0.3
Here are some considerations:
• The total number of scripts stored is limited by the NVRAM/FLASH size.
• Application of scripts is partial if a script fails. For example, if the script executes 5 of 10
commands and the script fails, the script stops at 5.
• Scripts cannot be modified or deleted while being applied.
• Validation of scripts checks for syntax errors only. It does not validate that the script will
run successfully.
script
(Netgear Switch) #script ?
apply Applies configuration script to the switch.
delete Deletes a configuration script file from the switch.
list Lists all configuration script files present on the switch.
show Displays the contents of configuration script.
validate Validate the commands of configuration script.
script list and script delete
(Netgear Switch) #script list
Configuration Script Name
-------------------------
basic.scr
running-config.scr
2 configuration script(s) found.
1020706 bytes free.
(Netgear Switch) #script delete basic.scr
Are you sure you want to delete the configuration script(s)? (y/n) y
1 configuration script(s) deleted.
Size(Bytes)
-----------
93
3201
Chapter 16. Tools | 283