NETGEAR GSM7228PS Software Administration Manual page 433

ProSafe 7000 Managed Switch Release 8.0.3
a. Select System > Services > DHCP Server > DHCP Server Configuration. A screen
similar to the following displays.
b. For Admin Mode, select the Enable radio button.
c. In the IP Range From field, enter 10.200.1.1.
d. In the IP Range To field, enter 10.200.1.1.
e. Click Add.
5. Create a DHCP pool named dhcp_server.
a. Select System > Services > DHCP Server > DHCP Pool Configuration. A screen
similar to the following displays.
b. Under DHCP Pool Configuration, enter the following information:
• In the Pool Name list, select Create.
• In the Pool Name field, enter dhcp_server.
• In the Type of Binding list, select Dynamic.
• In the Network Number field, enter 10.200.1.0.
• In the Network Mask field, enter 255.255.255.0. As an alternate, you can enter
24 in the Network Prefix Length field.
Chapter 27. DHCP L2 Relay and L3 Relay | 433