ProSafe 7000 Managed Switch Release 8.0.3
a. Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to
the following displays.
b. Scroll down and select the Port 1/0/13 check box. Now 1/0/13 appears in the Port
field at the top.
c. Enter the following information:
•
In the IP Address field, enter 192.168.2.1.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Routing Mode field, select Enable.
d. Click Apply to save the settings.
4.
Configure 1/0/21 as a routing port and assign an IP address to it.
a. Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to
the following displays.
b. Scroll down and select the Port 1/0/13 check box. Now 1/0/13 appears in the Port
field at the top.
c. Enter the following information:.
•
In the IP Address field, enter 192.168.3.2.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Routing Mode field, select Enable.
d. Click Apply to save the settings.
5.
Enable IP multicast on the switch.
Chapter 29. DVMRP
| 465