NETGEAR GSM7228PS Software Administration Manual page 348

e. Click Add.
5. Add port 6 and 7 to group1.
a. Select Security > Traffic Control > Private Group VLAN >Private Group
Membership. A screen similar to the following displays.
b. In the Group ID list, select 1.
c. Click Unit 1. The ports display.
d. Click the gray boxes under ports 6 and 7. A check mark displays in each box.
e. Click Apply.
6. Create a private group, group2.
a. Select Security > Traffic Control > Private Group VLAN > Private Group
Configuration. A screen similar to the following displays.
b. In the Group Name field, enter group2.
c. In the Group ID field, enter 2.
d. In the Group Mode field, select isolated.
e. Click Add.
7. Add ports 16 and 17 to group2.
348 | Chapter 22. Double VLANs and Private VLAN Groups
ProSafe 7000 Managed Switch Release 8.0.3