NETGEAR GSM7228PS Software Administration Manual page 448

Managed switch release 8.0.3

Hide thumbs Also See for GSM7228PS:

Table of Contents

a. Select Routing > IPv6 > Advanced > Interface Configuration. A screen similar to

the following displays.

b. Scroll down and select the Interface 1/0/21 and 1/0/24 check boxes.

c. Enter the following information:

In the IPv6 Mode field, select Enable.

In the Routing Mode field, select Enable.

In the Admin Mode field, select Enable.

d. Click Apply to save the settings.

Assign an IPv6 address to 1/0/21.

a. Select Routing > IPv6 > Advanced > Prefix Configuration. A screen similar to the

following displays.

b. In the Interface field, select 1/0/21.

c. Enter the following information:

In the IPv6 Prefix field, enter 2001:1::2.

In the Prefix Length field, enter 64.

In the EUI64 field, select Disable.

d. Click Add to save the settings.

Chapter 28. MLD

ProSafe 7000 Managed Switch Release 8.0.3