NETGEAR GSM7228PS Software Administration Manual page 264

a. Select Security > Control > DHCP Snooping Global Configuration. A screen
similar to the following displays.
b. In the VLAN ID list, select 1.
c. For DHCP Snooping Mode, select the Enable radio button. A screen similar to the
following displays.
d. Click Apply.
3. Configure the port through which DHCP server is reached as trusted.
a. Select Security > Control > DHCP Snooping Interface Configuration. A screen
similar to the following displays.
b. Select the Interface 1/0/1check box.
c. For Interface 1/01/, in the Trust Mode field, select Enable.
264 | Chapter 14. Security Management
ProSafe 7000 Managed Switch Release 8.0.3