Auto Voip - NETGEAR GSM7228PS Software Administration Manual

Managed switch release 8.0.3

Hide thumbs Also See for GSM7228PS:

Table of Contents

ProSafe 7000 Managed Switch Release 8.0.3

a. Select QoS > DiffServ > Advanced > Service Configuration. A screen similar to the

following displays.

b. Scroll down and select the Interface 1/0/2 check box. Now 1/0/2 appears in the

Interface field at the top.

c. In the Policy In list, select pol_voip.

d. Click Apply to create a new policy.

Auto VoIP

The Auto-VoIP feature makes it easy to set up VoIP for IP phones on a switch. This

functionality copies VoIP signaling packets to the CPU to get the source and destination IP

address and Layer 4 port of the current session. Based on these parameters a filter is

Chapter 12. DiffServ