Web Interface: Configure Multiple STP (802.1s)
1.
Enable 802.1s on the switch.
a. Select Switching > STP > STP Configuration. A screen similar to the following
displays.
b. Enter the following information:
•
For Spanning Tree Admin Mode, select the Enable radio button.
•
For Force Protocol Version, select the IEEE 802.1s radio button.
c. Click Apply.
2.
Configure MST.
a. Select Switching > STP > MST Configuration. A screen similar to the following
displays.
b. Configure MST ID 1.
•
In the MST ID field, enter 1.
•
In the Priority field, enter 4096.
354 |
Chapter 23. Spanning Tree Protocol
ProSafe 7000 Managed Switch Release 8.0.3