NETGEAR GSM7228PS Software Administration Manual page 420

d. Click Apply.
8. Enable multicast globally.
a. Select Routing > Multicast > Global Configuration. A screen similar to the following
displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
9. Enable PIM-SM globally.
a. Select Routing > Multicast > PIM-SM > Global Configuration. A screen similar to
the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
10. Enable PIM-SM on interfaces 1/0/21, 1/0/22, and 1/0/24.
420 | Chapter 26. PIM
ProSafe 7000 Managed Switch Release 8.0.3