NETGEAR GSM7228PS Software Administration Manual page 391

ProSafe 7000 Managed Switch Release 8.0.3
a. Select Routing > Multicast > PIM-DM > Global Configuration. A screen similar to
the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
8. Enable PIM-DM on interfaces 1/0/21 and 1/0/22.
a. Select Routing > Multicast > PIM-DM > Interface Configuration. A screen similar
to the following displays.
b. Scroll down and select the 1/0/21 and 1/0/22 check boxes.
c. In the PIM-DM Interface Configuration, in the Admin Mode field, select Enable.
d. Click Apply to save the settings.
Chapter 26. PIM | 391