NETGEAR GSM7228PS Software Administration Manual page 200

Managed switch release 8.0.3

Hide thumbs Also See for GSM7228PS:

Table of Contents

Web Interface: Configure Auto-VoIP

Enable auto VoIP for all the interfaces in the device.

a. Select QoS > DiffServ > Auto VoIP. A screen similar to the following displays.

b. Select the check box in the first row to select all the interfaces.

c. In the Auto VoIP Mode field, select Enable. A screen similar to the following

d. Click Apply. A screen similar to the following displays.

Chapter 12. DiffServ

ProSafe 7000 Managed Switch Release 8.0.3