NETGEAR GSM7228PS Software Administration Manual page 342

Managed switch release 8.0.3

Hide thumbs Also See for GSM7228PS:

Table of Contents

Click the gray box under port 48 once until T displays. The T specifies that the

egress packet is tagged for the port.

d. Click Apply to save the settings.

Change the port VLAN ID (PVID) of port 24 to 200:

a. Select Switching > VLAN > Advanced > Port PVID Configuration. A screen similar

to the following displays.

b. Scroll down and select the Interface 1/0/24 check box. Now 1/0/24 appears in the

Interface field at the top.

c. In the PVID (1 to 4093) field, enter 200.

d. Click Apply to save the settings.

Configure port 48 as the provider service port:

Chapter 22. Double VLANs and Private VLAN Groups

ProSafe 7000 Managed Switch Release 8.0.3