NETGEAR GSM7228PS Software Administration Manual page 474

a. Select Routing > Multicast > IGMP > Global Configuration. A screen similar to the
following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
9. Enable IGMP on the interface.
a. Select Routing > Multicast > IGMP > Routing Interface Configuration. A screen
similar to the following displays.
b. Scroll down and select the Interface 1/0/24 check box. Now 1/0/24 appears in the
Interface field at the top.
c. In the Admin Mode field, select Enable.
d. Click Apply to save the settings.
474 | Chapter 29. DVMRP
ProSafe 7000 Managed Switch Release 8.0.3