Configuration Scripting - NETGEAR GSM7228PS Software Administration Manual

Web Interface: Traceroute
1. Select Maintenance > Troubleshooting > Traceroute. A screen similar to the following
displays.
Use this screen to tell the switch to discover the routes that packets actually take when
traveling to their destination through the network on a hop-by-hop basis. Once you click
the Apply button, the switch will send three traceroute packets each hop, and the results
will be displayed in the result table.
2. In the IP Address field, enter 216.109.118.74.
3. Click Apply.

Configuration Scripting

This section provides the following examples:
• script on page 283
• script list and script delete
• script apply running-config.scr
• Create a Configuration Script
• Upload a Configuration Script
Configuration scripting:
• Allows you to generate text-formatted files.
• Provides scripts that can be uploaded and downloaded to the system.
• Provides flexibility to create command configuration scripts.
• Can be applied to several switches.
• Can save up to 10 scripts or 500 K of memory.
• Provides script format of one CLI command per line.
282 | Chapter 16. Tools
ProSafe 7000 Managed Switch Release 8.0.3
on page 283
on page 284
on page 284
on page 284