NETGEAR GSM7228PS Software Administration Manual page 451

ProSafe 7000 Managed Switch Release 8.0.3
a. Select Routing > Multicast > PIM-DM > Global Configuration. A screen similar to
the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
10. Enable PIM-DM on interfaces 1/0/21 and 1/0/24.
a. Select Routing > Multicast > PIM-DM > Interface Configuration. A screen similar
to the following displays.
b. Under PIM-DM Interface Configuration, scroll down select the Interface 1/0/21 and
1/0/24 check boxes.
c. In the Admin Mode field, select Enable.
d. Click Apply to save the settings.
11. Enable MLD on the switch.
Chapter 28. MLD | 451