NETGEAR GSM7228PS Software Administration Manual page 130

• In the IP Address field, enter 192.168.40.1.
• In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display.
d. Click the gray box under port 24 twice until U displays. The U specifies that the
egress packet is untagged for the port.
e. Click Apply to save VLAN 40.
2. Create VLAN 50 with IP address 192.168.50.1/24:
a. Select Routing > VLAN > VLAN Routing Wizard. A screen similar to the following
displays.
b. Enter the following information:
• In the Vlan ID field, enter 50.
• In the IP Address field, enter 192.168.50.1.
• In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display.
d. Click the gray box under port 25 twice until U displays. The U specifies that the
egress packet is untagged for the port.
e. Click Apply to save VLAN 50.
3. Create VLAN 200 with IP address 192.168.200.2/24.
130 | Chapter 10. ACLs
ProSafe 7000 Managed Switch Release 8.0.3