NETGEAR GSM7228PS Software Administration Manual page 97

ProSafe 7000 Managed Switch Release 8.0.3
a. Select Routing > OSPF > Advanced > Interface Configuration. A screen similar to
the following displays.
b. Under Interface Configuration, click VLANS to show all the VLAN interfaces.
c. Scroll down and select the interface 0/2/1 check box. Now 0/2/1 appears in the
Interface field at the top.
d. Enter the following information:
• In the OSPF Area ID field, enter 0.0.0.2.
• In the OSPF Admin Mode field, select Enable.
• In the Priority field, enter 128.
• In the Metric Cost field, enter 32.
e. Click Apply to save the settings.
5. Enable OSPF on VLAN 20.
a. Select Routing > OSPF > Advanced > Interface Configuration. A screen similar to
the following displays.
b. Under Interface Configuration, click VLANS to show all the VLAN interfaces.
Chapter 7. OSPF | 97