Create An Ipv6 Routing Vlan - NETGEAR GSM7228PS Software Administration Manual

d. In the EUI64 field, select False.
e. Click Add.
2. Add an IPv6 gateway to the network interface.
a. Select System > Management > Network Interface > IPv6 Network Configuration.
A screen similar to the following displays.
b. In the IPv6 Gateway field, enter 2001:1::2.
c. Click Apply.

Create an IPv6 Routing VLAN

The example is shown as CLI commands and as a Web interface procedure.
CLI: Create an IPv6 Routing VLAN
1. Create a routing VLAN with VLAN ID 500.
Netgear Switch) (Vlan)#vlan 500
(Netgear Switch) (Vlan)#vlan routing 500
(Netgear Switch) (Vlan)#exit
2. Add interface 1/0/1 to VLAN 500.
(Netgear Switch) #config
(Netgear Switch) (Config)#interface 1/0/1
(Netgear Switch) (Interface 1/0/1)#vlan participation include 500
(Netgear Switch) (Interface 1/0/1)#vlan participation pvid 500
(Netgear Switch) (Interface 1/0/1)#exit
368 | Chapter 25. IPv6 Interface Configuration
ProSafe 7000 Managed Switch Release 8.0.3