a. Select Routing > Multicast > Global Configuration. A screen similar to the following
displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
6.
Enable DVMRP on the switch.
a. Select Routing > Multicast > DVMRP > Global Configuration. A screen similar to
the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
7.
Enable DVMRP on the interface.
466 |
Chapter 29. DVMRP
ProSafe 7000 Managed Switch Release 8.0.3