ProSafe 7000 Managed Switch Release 8.0.3
a. Select Switching > VLAN > Basic > VLAN Configuration. A screen similar to the
following displays.
b. Under VLAN Configuration, enter the following information:
•
In the VLAN ID field, enter 200.
•
In the VLAN Name field, enter vlan200.
•
In the VLAN Type field, select Static.
c. Click Add.
2.
Add ports 24 and 48 to VLAN 200.
a. Select Switching > VLAN > Advanced > VLAN Membership. A screen similar to
the following displays.
b. Under VLAN Membership, in the VLAN ID field, select 200.
c. Click Unit 1. The ports display:
•
Click the gray box under port 24 twice until U displays. The U specifies that the
egress packet is untagged for the port.
Chapter 22. Double VLANs and Private VLAN Groups
| 341