Show Logging Traplogs - NETGEAR GSM7228PS Software Administration Manual

Web Interface: Show Logging Buffered
Select Monitoring > Logs > Buffer Logs. A screen similar to the following displays.

Show Logging Traplogs

The example is shown as CLI commands and as a Web interface procedure.
CLI: Show Logging Traplogs
(Netgear Switch Routing)
<cr> Press Enter to execute the command.
(Netgear Switch Routing)
Number of Traps Since Last Reset............ 6
Trap Log Capacity............................256
Number of Traps Since Log Last Viewed....... 6
Log System Up Time
--- --------------
0 0 days 00:00:46
1 0 days 00:01:01
2 0 days 00:21:33
3 0 days 18:33:31
4 0 days 19:27:05
5 0 days 19:29:57
Web Interface: Show Logging Trap Logs
298 | Chapter 17. Syslog
#show logging traplogs
#show logging traplogs
Trap
----------------------------------------------
Link Up: Unit: 3 Slot: 0 Port: 2
Cold Start: Unit: 0
Failed User Login: Unit: 1 User ID: admin
Failed User Login: Unit: 1 User ID: \
Multiple Users: Unit: 0
Multiple Users: Unit: 0
ProSafe 7000 Managed Switch Release 8.0.3
Slot: 3 Port: 1
Slot: 3 Port: 1
?