NETGEAR GSM7228PS Software Administration Manual page 477

ProSafe 7000 Managed Switch Release 8.0.3
2. Enable captive portal instance 1.
(Netgear Switch) (Config-CP)#configuration 1
(Netgear Switch) (Config-CP 1)#enable
3. Enable captive portal instance 1 on port 1/0/1.
(Netgear Switch) (Config-CP 1)#interface 1/0/1
Web Interface: Enable Captive Portal
1. Enable captive portal on the switch.
a. Select Security > Control > Captive Portal > CP Global Configuration. A screen
similar to the following displays.
b. For Admin Mode, Select the Enable radio button.
c. Click Apply.
2. Enable captive portal instance 1 on the switch.
Chapter 30. Captive Portal | 477