Add Ports To Lags - NETGEAR GSM7228PS Software Administration Manual

b. In the Lag Name field, enter lag_10.
c. Click Add.
2. Create LAG lag_20.
a. Select Switching > LAG > LAG Configuration. A screen similar to the following
displays.
b. In the Lag Name field, enter lag_20.
c. Click Add.

Add Ports to LAGs

The example is shown as CLI commands and as a Web interface procedure.
CLI: Add Ports to the LAGs
(Netgear Switch) #config
(Netgear Switch) (Config)#interface 0/2
(Netgear Switch) (Interface 0/2)#addport 1/1
(Netgear Switch) (Interface 0/2)#exit
(Netgear Switch) (Config)#interface 0/3
(Netgear Switch) (Interface 0/3)#addport 1/1
(Netgear Switch) (Interface 0/3)#exit
(Netgear Switch) (Config)#interface 0/8
(Netgear Switch) (Interface 0/8)#addport 1/2
(Netgear Switch) (Interface 0/8)#exit
(Netgear Switch) (Config)#interface 0/9
(Netgear Switch) (Interface 0/9)#addport 1/2
(Netgear Switch) (Interface 0/9)#exit
(Netgear Switch) (Config)#exit
36 | Chapter 3. LAG s
ProSafe 7000 Managed Switch Release 8.0.3