d. Click test_dept to configure this class.
e. Under Diffserv Class Configuration, enter the following information:
•
In the Source IP Address field, enter 172.16.30.0.
•
In the Source Mask field, enter 255.255.255.0.
f. Click Apply.
5.
Create class development_dept.
a. Select QoS > DiffServ > Advanced > Class Configuration. A screen similar to the
following displays.
b. Enter the following information:
•
In the Class Name field, enter development_dept.
•
In the Class Type list, select All.
c. Click the Add to create a new class development_dept.
180 |
Chapter 12. DiffServ
ProSafe 7000 Managed Switch Release 8.0.3