NETGEAR GSM7228PS Software Administration Manual page 284

script apply running-config.scr
(Netgear Switch) #script apply running-config.scr
Are you sure you want to apply the configuration script? (y/n) y
The system has unsaved changes.
Would you like to save them now? (y/n) y
Configuration Saved!
Create a Configuration Script
(Netgear Switch) #show running-config running-config.scr
Config script created successfully.
(Netgear Switch)
Configuration Script Name
-------------------------
running-config.scr
1 configuration script(s) found.
1020799 bytes free.
Upload a Configuration Script
(Netgear Switch) #copy nvram: script running-config.scr
tftp://192.168.77.52/running-config.scr
Mode.........................
Set TFTP Server IP...........
TFTP Path....................
TFTP Filename................
Data Type....................
Source Filename..............
Are you sure you want to start? (y/n) y
File transfer operation completed successfully.
284 | Chapter 16. Tools
ProSafe 7000 Managed Switch Release 8.0.3
#script list
Size(Bytes)
----------
3201
TFTP
192.168.77.52
./
running-config.scr
Config Script
running-config.scr