NETGEAR GSM7228PS Software Administration Manual page 450

a. Select Routing > OSPFv3 > Advanced > Interface Configuration. A screen similar
to the following displays.
b. Under OSPFv3 Interface Configuration, scroll down and select the Interface 1/0/21
and 1/0/24 check boxes.
c. In the OSPFv3 Interface Configuration, in the Admin Mode field, select Enable.
d. Click Apply to save the settings.
8. Enable multicast globally.
a. Select Routing > Multicast > Global Configuration. A screen similar to the following
displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
9. Enable PIM-DM globally.
450 | Chapter 28. MLD
ProSafe 7000 Managed Switch Release 8.0.3