Installing The Router Chassis In The Rack - Cisco 7600-SIP-400 - SPA Interface Processor 400 Installation Manual

Chapter 3 Installing the Cisco 7600 Series Router
Figure 3-8
L bracket
Position one of the brackets against the chassis side, and align the screw holes.
Step 2
Secure the bracket to the chassis with the screws removed in
Step 3
Repeat Steps 2 and 3 for the other bracket.
Step 4

Installing the Router Chassis in the Rack

Warning To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the
handles on modules (such as power supplies, fans, or cards); these types of handles are not designed
to support the weight of the unit. Lift the unit only by using handles that are an integral part of the
chassis, or by grasping the chassis underneath its lower edge.
OL-4503-26
Brackets on Cisco 7609 Router and Cisco 7609-S Router
POWE R SUPP LY 1
POWE R SUPP LY 2
o
INPUT
FAN OUTPUT
OK
OK FAIL

Installing the Router Chassis in the Rack

L bracket
Step 1.
Cisco 7600 Series Router Installation Guide
3-9