Cisco 7600-SIP-400 - SPA Interface Processor 400 Installation Manual page 91

Installing the Cisco 7600 Series Router
This publication describes the following Cisco 7600 series routers:
Note
• Cisco 7603 Router-CISCO7603
• Cisco 7603-S Router-CISCO7603-S
• Cisco 7604 router-CISCO7604
Cisco 7606 Router-CISCO7606
•
Cisco 7606-S Router-CISCO7606-S
•
Cisco 7609 Router-CISCO7609
•
Cisco 7609-S Router-CISCO7609-S
•
Cisco 7613 Router-CISCO7613
•
Information on the Cisco 7609 Router (product number OSR-7609) is in the Cisco 7609 Router
Installation Guide, located at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/hardware/
osrouter/index.htm
This chapter describes how to install a Cisco 7600 series router in a rack. For first-time installations,
perform the procedures in the following sections in the order listed:
Unpacking the Router, page 3-2
•
Installation Guidelines, page 3-3
•
Required Tools, page 3-4
•
• Installing the Shelf Brackets and Crossbar Bracket, page 3-4
• Installing the Chassis Brackets, page 3-5
• Installing the Router Chassis in the Rack, page 3-9
Installing the Stabilizer Kit (Cisco 7609 Router, Cisco 7609-S, and Cisco 7613 Router Only), page
•
3-13
• Installing the Cable Management System (Cisco 7609 Router and Cisco 7609-S Router Only), page
3-15
• System Ground Connection, page 3-19
• Installing the Power Supplies in the Router Chassis, page 3-25
• Attaching the Interface Cables, page 3-25
OL-4503-26
3
C H A P T E R
Cisco 7600 Series Router Installation Guide
3-1