Cisco 7613 Router - Cisco 7600-SIP-400 - SPA Interface Processor 400 Installation Manual

Chapter 1 Product Overview
Note
A Supervisor Engine 720 in slot 7 and an optional redundant Supervisor Engine 720 in slot 8. Each
•
supervisor engine provides switching, local and remote management. The Supervisor Enigne 720
has two GBIC uplink ports and one 10/100/1000 Tx port. Only two of the three ports can be active
at any one time.
Note
A Supervisor Engine 32 in slot 7 and an optional redundant Supervisor Engine 32 in slot 8. Each
•
supervisor engine provides switching, local and remote management.
A Route Switch Processor 720 in slot 5 and an optional redundant Route Switch Processor 720 in
•
slot 6. Each supervisor engine provides switching, local and remote management.
Note
For a detailed description of supervisor engine operation in a redundant configuration, refer to the
Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide.
Up to 12 additional hot-swappable OSMs or Catalyst 6500 series modules
•
–
–
Hot-swappable fan assembly
•
Redundant AC-input or DC-input power supplies
•
OL-4503-26
Both supervisor engines in a single chassis must be completely identical.
The GBIC uplink ports are fully functional on the redundant supervisor engine in standby
mode.
Both supervisor engines in a single chassis must be completely identical.
Fabric-enabled module support provided in all slots (requires a Switch Fabric Module
[WS-X6500-SFM2] be installed)
Dual Fabric connectivity supported in slots 9-13 (requires a Switch Fabric Module
[WS-X6500-SFM2] be installed)
Cisco 7600 Series Router Installation Guide

Cisco 7613 Router

1-15