Bits 0–3 - Cisco 7600-SIP-400 - SPA Interface Processor 400 Installation Manual

Appendix C Configuration Register Information
in ROMmon. If bit 13 is not set, the router will continue to netboot images indefinitely. The default
setting for bit 13 is 0. If bit 13 is set, the system boots the boot helper image found in boot flash memory
without any retries.
The server creates a default filename as part of the automatic configuration processes. To form the boot
filename, the server starts with Cisco and links the octal equivalent of the boot field number, a dash, and
the image name.
A boot system configuration command in the router configuration in NVRAM overrides the default
Note
netboot filename.
Table C-3
Action/File Name
Bootstrap mode
ROM software
Flash software
cisco3-< image-name1>
cisco4-<image-name2>
cisco5-<image-name3>
cisco6-<image-name4>
cisco7-<image-name5>
cisco10-<image-name6>
cisco11-<image-name7>
cisco12-<image-name8>
cisco13-<image-name9>
cisco14-<image-name10>
cisco15-<image-name11>
cisco16-<image-name12>
cisco17-<image-name13>
Bit 6
Bit 6 causes the system software to ignore nonvolatile random-access memory (NVRAM) contents.
Bit 7
Bit 7 enables the OEM bit. It disables the bootstrap messages at startup.
OL-4503-26
Table C-3 lists the default boot filenames or actions.
Default Boot Filenames
Configuration Bit Meanings
Bit 3 Bit 2 Bit 1
0 0 0
0 0 0
0 0 1
0 0 1
0 1 0
0 1 0
0 1 1
0 1 1
1 0 0
1 0 0
1 0 1
1 0 1
1 1 0
1 1 0
1 1 1
1 1 1
Cisco 7600 Series Router Installation Guide
Bit 0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
C-3