Cisco 7600-SIP-400 - SPA Interface Processor 400 Installation Manual page 263

Chapter 5 Removal and Replacement Procedures
Figure 5-133
Unscrew the single captive screw that retains the thermistor module in the chassis. See
Step 2
Figure 5-134
1
Thermistor slots
3 Flange
Grasp the flange on the thermistor module (see
Step 3
See Figure
OL-4503-26
Removing the Intake Panel
Thermistor Module
1
5-135.
Installing the Thermistor Module on a Cisco 7609-S Router
2
3
2
Captive screw
Figure 5-134) and pull to remove the thermistor module.
Cisco 7600 Series Router Installation Guide
Figure 5-134.
5-135