Cisco 7600-SIP-400 - SPA Interface Processor 400 Installation Manual page 100

Installing the Router Chassis in the Rack
To install the router chassis in the equipment rack, perform these steps:
Position the chassis in the rack as follows:
Step 1
If the front of the chassis (front panel) is at the front of the rack, insert the rear of the chassis between
a.
the mounting posts.
If the rear of the chassis is at the front of the rack, insert the front of the chassis between the
b.
mounting posts.
Align the mounting holes in the bracket (and optional cable guide) with the mounting holes in the
Step 2
equipment rack. (See
Figure 3-11
Cisco 7609 router, Cisco 7609-S router, and Cisco 7613 router.)
Figure 3-9
Cisco 7600 Series Router Installation Guide
3-10
Figure 3-9 for the Cisco 7603 router,
for the Cisco 7606 router,
Installing the Cisco 7603 Router in the Rack
WS-X6K -SUP2-2 GE
CONSOLE
PORT
MODE
CONSOLE
SUPERV ISOR2
PCMCIA
EJECT
OSM-4OC1 2 POS-SI
4 PORT OC-12 POS SM
IR
OSM-4OC1 2 POS-SI
4 PORT OC-12 POS SM
IR
Chapter 3
Figure 3-10
Figure 3-12 for the Cisco 7606-S router, and
Switch Load
100%
PORT 1
PORT 2
1%
Installing the Cisco 7600 Series Router
for the Cisco 7604 router,
Figure 3-13 for the
OL-4503-26