Site Planning Checklist - Cisco 7600-SIP-400 - SPA Interface Processor 400 Installation Manual

Site Planning Checklist

•
•
Caution Do not connect the DC-return wire to the system frame or to the system grounding equipment.
Site Planning Checklist
Table 2-22
series router. Completing each activity helps ensure a successful router installation.
Table 2-22 Site Planning Checklist
Task No. Planning Activity
1 Space evaluation:
Space and layout
Floor covering
Impact and vibration
Lighting
Maintenance access
2 Environmental evaluation:
Ambient temperature
Humidity
Altitude
Atmospheric contamination
Airflow
3 Power evaluation:
Input power type
Power receptacles (15A/20A/30A))
Receptacle proximity to the equipment
Dedicated (separate) circuits for redundant
power supplies
UPS for power failures
DC systems: Proper gauge wire and lugs
4 Grounding evaluation:
Circuit breaker size
CO ground (AC- and DC-powered systems)
5 Cable and interface equipment evaluation:
Cable type
Connector type
Cable distance limitations
Interface equipment (transceivers)
6 EMI evaluation:
Distance limitations for signaling
Site wiring
RFI levels
Cisco 7600 Series Router Installation Guide
2-34
The circuit breaker is considered the disconnect device and should be easily accessible.
The system ground is the power supply and chassis ground.
lists the site planning activities that you should perform prior to installing the Cisco 7600
Verified By Time
Chapter 2 Preparing for Installation
Date
OL-4503-26