Cisco 7600-SIP-400 - SPA Interface Processor 400 Installation Manual page 306

Cisco 7606 Router
Figure D-1
Cisco 7606 Router
To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the
Warning
handles on modules (such as power supplies, fans, or cards); these types of handles are not designed
to support the weight of the unit. Lift the unit only by using handles that are an integral part of the
chassis, or by grasping the chassis underneath its lower edge.
If you need to return or move the Cisco 7606 Router, follow these steps to repack the switch using the
original packaging material:
Step 1 Set the chassis on the packing material on the bottom pallet. (See
Step 2 Place the top-packing material over the top of the chassis.
Place the accessory kit on the top-packing material.
Step 3
Note
Cisco 7600 Series Router Installation Guide
D-2
Cisco 7603 Router Packing Material
Packing
carton
You must include the accessory kit for the final packaging to fit properly.
Appendix D
Documentation and
accessories in poly bag
Packing foam
Repacking the Cisco 7600 Series Router
Packing
foam
Figure D-2.)
OL-4503-26