Cisco 7600-SIP-400 - SPA Interface Processor 400 Installation Manual page 277

Appendix A Technical Specifications
Table A-9 Power Supply Specifications (continued)
Item
1900 W AC- and DC-input Power Supply
AC-input type
AC-input voltage rating
AC-input current rating
AC-input frequency
Power supply output capacity
DC-input voltage rating
DC-input current rating
Power supply output (AC supply)
Power supply output (DC supply)
Output holdup time
2500 W DC-input Power Supply
Power supply output capacity
System power dissipation
DC-input voltage rating
DC-input current
Power supply output rating
DC input terminal block
Output holdup time
2700 W AC-input Power Supply
AC-input type
AC-input voltage rating
AC-input current rating
Power supply output capacity
AC-input frequency
Power supply output
KVA rating
OL-4503-26
Specification
Autoranging input with power factor corrector
100 to 240 VAC (±10% for full range)
12A
50/60 Hz (nominal)
1050 W maximum (100–120 VAC)
1900 W maximum (200–240 VAC)
-48 VDC to -60 VDC continuous
50A
+1.5V @ 15A, +3.3V @ 2.5A, +50V @ 20.38A (110 VAC)
+1.5V @ 15A, +3.3V @ 2.5A, +50V @ 37.38A (220 VAC)
+1.5V @ 15A, +3.3V @ 2.5A, +50V @ 37.38A
20 ms minimum (AC-input power supply)
8 ms (DC-input power supply)
Specification
2500 W maximum.
3520 W (total input power).
-48 VDC to -60 VDC continuous.
80A
15A @ +3.3V, 5A @ +5V, 12A @ +12V, 55.5A @ +42V.
Accepts 2-14 AWG copper conductors. Actual size of the
wire needed is determined by the installer or local
electrician. Terminal block material rated at 150°C.
4 ms
Specification
Autoranging input with power factor corrector
100 to 120 VAC, 200 to 240 VAC (±10% for full range)
16 A @ 200 VAC (2700 W output)
•
16 A @ 100 VAC (1350 W output)
•
1350 W maximum (100–120 VAC)
•
2700 W maximum (200–240 VAC)
•
50/60 Hz (nominal) (±3% for full range)
• +1.5V @ 15A, +3.3V @ 2.5A, +50V @ 27.49A (110
VAC)
• +1.5V @ 15A, +3.3V @ 2.5A, +50V @ 55.61A (220
VAC)
3.4 KVA (high-line operation)
Cisco 7600 Series Router Power Supplies
Cisco 7600 Series Router Installation Guide
A-11