Procedure: Edit Protection Groups; Procedure: Delete Protection Groups; Figure 3-7 Editing Protection Groups - Cisco 15454-TCC - Network Processor Card Operation Manual

Chapter 3 Node Setup
Click the Provisioning > Line tabs.
Step 2
Step 3 Change the port status to In Service.
Step 4 Click Apply.

Procedure: Edit Protection Groups

Step 1 From the CTC node view, click the Provisioning > Protection tabs
Figure 3-7
Step 2 In the Protection Groups section, choose a protection group.
Step 3 In the Selected Group section, edit the fields as appropriate. (For field descriptions, see the
Protection Groups" procedure on page
Step 4 Click Apply.

Procedure: Delete Protection Groups

Step 1 From the CTC node view, click the Maintenance > Protection tabs.
November 2001
Editing protection groups
3-9.)
Cisco ONS 15454 Installation and Operations Guide
Creating Protection Groups
(Figure 3-7).
"Create
3-11