Cisco 15454-TCC - Network Processor Card Operation Manual page 9

Circuits and Tunnels
6
C H A P T E R
Card Provisioning
7
C H A P T E R
November 2001
Procedure: Add a UPSR Node
Procedure: Remove a UPSR Node
5.4 Subtending Rings
5-36
Procedure: Subtend a UPSR from a BLSR
Procedure: Subtend a BLSR from a UPSR
Procedure: Subtend a BLSR from a BLSR
5.5 Linear ADM Configurations
Procedure: Create a Linear ADM
Procedure: Convert a Linear ADM to UPSR
Procedure: Convert a Linear ADM to a BLSR
5.6 Path-Protected Mesh Networks
6-1
6.1 Circuits Overview
6-1
6.2 Creating Circuits and VT Tunnels
Procedure: Create an Automatically Routed Circuit
Procedure: Create a Manually Routed Circuit
6.3 Creating Multiple Drops for Unidirectional Circuits
Procedure: Create a Unidirectional Circuit with Multiple Drops
6.4 Creating Monitor Circuits
Procedure: Create a Monitor Circuit
6.5 Searching for Circuits
Procedure: Search for ONS 15454 Circuits
6.6 Editing UPSR Circuits
Procedure: Edit a UPSR Circuit
6.7 Creating a Path Trace
Procedure: Create a J1 Path Trace
6.8 Cross-Connect Card Capacities
6.8.1 VT1.5 Cross-Connects
6.8.2 VT Tunnels
6-19
6.9 Creating DCC Tunnels
Procedure: Provision a DCC Tunnel
7-1
7.1 Performance Monitoring Thresholds
7.2 Provisioning Electrical Cards
7.2.1 DS-1 Card Parameters
Procedure: Modify Line and Threshold Settings for the DS-1 Card
5-34
5-35
5-38
5-38
5-40
5-41
5-42
5-42
5-47
5-50
6-2
6-9
6-9
6-10
6-10
6-10
6-11
6-12
6-13
6-15
6-16
6-21
6-22
7-1
7-2
7-3
Cisco ONS 15454 Installation and Operations Guide
6-2
6-6
6-8
6-8
7-3
Contents
ix