Figure 10-1 Viewing Alarms In The Ctc Node View; Table 10-1 Alarms Column Descriptions - Cisco 15454-TCC - Network Processor Card Operation Manual

Viewing ONS 15454 Alarms

Table 10-1 Alarms Column Descriptions

Column
New
Date
Node
Object
Type
Slot
Port
Sev
ST
SA
Cond
Description
Num
Ref

Figure 10-1 Viewing alarms in the CTC node view

Cisco ONS 15454 Installation and Operations Guide
10-2
Information Recorded
Indicates a new alarm. To change this status check either the Synchronize Alarms or
Delete Cleared Alarms checkbox, or reset the active TCC+ card.
Date and time of the alarm
Node where the alarm occurred (displays in network view only)
TL1 access identifier (AID) for the alarmed object
Card type in this slot
Slot where the alarm occurred (displays in network and node view only)
Port where the alarm occurred
Severity level: CR (critical), MJ (major), MN (minor), NA (not alarmed), NR (not
reported)
Status: R (raised), C (clear), T (transient)
When checked, indicates a service-affecting alarm
The error message/alarm name. These are defined alphabetically in the alarm chapter of
the Cisco ONS 15454 Troubleshooting and Maintenance Guide.
Description of the alarm
A count of incrementing alarm messages (this column is hidden by default)
The reference number assigned to a cleared alarm (this column is hidden by default).
Chapter 10 Alarm Monitoring and Management
November 2001