Setting Up Blsrs; Figure 5-9 Shelf Assembly Layout For Node 0 In; Figure 5-10 Shelf Assembly Layout For Nodes 1 - 4 In - Cisco 15454-TCC - Network Processor Card Operation Manual

Chapter 5 SONET Topologies
Bidirectional Line Switched Rings
Figure 5-9 Shelf assembly layout for Node 0 in Figure 5-8
Figure 5-10 Shelf assembly layout for Nodes 1 – 4 in Figure 5-8

5.2.5 Setting Up BLSRs

To set up a BLSR on the ONS 15454, you perform five basic procedures:
Install the BLSR trunk cards. See the "Install the BLSR Trunk Cards" procedure on page 5-11.
•
Cisco ONS 15454 Installation and Operations Guide
5-10
78-13453-01