Figure 8-17 Monitored Signal Types For The Ds3-12E And Ds3N-12E Cards; Figure 8-18 Pm Read Points On The Ds3-12E And Ds3N-12E Cards - Cisco 15454-TCC - Network Processor Card Operation Manual

Operation guide
Hide thumbs Also See for 15454-TCC - Network Processor Card:
Table of Contents

Advertisement

Chapter 8
Performance Monitoring

Figure 8-17 Monitored signal types for the DS3-12E and DS3N-12E cards

ONS 15454
Note
The XX in the illustration above represents all PMs listed below with the given prefix and/or suffix.

Figure 8-18 PM read points on the DS3-12E and DS3N-12E cards

DS3 CV-L
DS3 ES-L
DS3 SES-L
DS3 LOSS-L
DS3 AISS-P
DS3 CVP-P
DS3 ESP-P
DS3 SASP-P
DS3 SESP-P
DS3 UASP-P
DS3 CVCP-P
DS3 ESCP-P
DS3 SESCP-P
DS3 UASCP-P
DS3 CVCP-PFE
DS3 ESCP-PFE
DS3 SASCP-PFE
DS3 SESCP-PFE
DS3 UASCP-PFE
PMs read on LIU
November 2001
Near End
DS3 Signal
DS3E
OC48
DS3E Path Far End PMs Are Supported
STS Path (STS XX-P) Far End PMs Not Supported
DS3-12E & DS3N-12E Cards
LIU
DS3 Side
Far End
Fiber
OC48
ONS 15454
Mux/Demux ASIC
SONET Side
STS CV-P
STS ES-P
Path
STS FC-P
Level
STS SES-P
STS UAS-P
PMs read on Mux/Demux ASIC
Cisco ONS 15454 Installation and Operations Guide
Performance Monitoring for Electrical Cards
DS3 Signal
ONS 15454
DS3E
XC10G Card
OC-N
BTC
ASIC
8-25

Advertisement

Table of Contents
loading

Table of Contents