Procedure: Modify Line And Threshold Settings For The Ds3Xm-6 Card; Table 7-5 Ds3Xm-6 Parameters - Cisco 15454-TCC - Network Processor Card Operation Manual

Provisioning Electrical Cards

Procedure: Modify Line and Threshold Settings for the DS3XM-6 Card

Step 1 Display the DS3XM-6 in CTC card view.
Step 2 Click the Provisioning tab.
Depending on the setting you need to modify, click the Line, Line Thrshld, Elect Path, or Sonet
Step 3
Thrshld subtab.
Note
Step 4 Modify the settings shown in
double-click the field and type the new number.
Table 7-5
Subtab
Line
Line Thrshld
Cisco ONS 15454 Installation and Operations Guide
7-12
See Chapter 10, "Alarm Monitoring and Management"
Behavior tab.
Table
DS3XM-6 Parameters
Parameter Description
Port # Port number
Port Port name
Line Type Defines the line framing type
Line Coding Defines the DS-1 transmission
coding type that is used
Line Length Defines the distance (in feet)
from backplane connection to
the next termination point
Status Places port in or out of service
CV Coding violations
ES Errored seconds
SES Severely errored seconds
Loss Loss of signal
7-5. For drop-down lists, select an item from the list. For numerics,
Chapter 7 Card Provisioning
for information about the Alarm
Options
1 - 6
To enter a name for the port, click the
cell and type the name. To change a
name, double-click the cell, then edit
the text.
• M23 - default
C BIT
•
• B3ZS
• 0 - 225 (default)
• 226 - 450
• Out of Service (default)
• In Service
Numeric. Defaults:
387 (15 minutes)
•
3865 (1 day)
•
Numeric. Defaults:
25 (15 minutes)
•
• 250 (1 day)
Numeric. Defaults:
• 4 (15 minutes)
40 (1 day)
•
Numeric. Defaults:
10 (15 minutes)
•
10 (1 day)
•
November 2001