Chapter 4 Ip Networking; Ip Networking Overview - Cisco 15454-TCC - Network Processor Card Operation Manual

Operation guide
Hide thumbs Also See for 15454-TCC - Network Processor Card:
Table of Contents

Advertisement

IP Networking
This chapter explains how to set up Cisco ONS 15454s in internet protocol (IP) networks and includes:
The chapter does not provide a comprehensive explanation of IP networking concepts and procedures.
Note
To set up ONS 15454s within an IP network, you must work with a LAN administrator or other
individual at your site who has IP networking training and experience. To learn more about IP
networking, many outside resources are available. IP Routing Fundamentals, by Mark Sportack
(Cisco Press, 1999), provides a comprehensive introduction to routing concepts and protocols in IP
networks.

4.1 IP Networking Overview

ONS 15454s can be connected in many different ways within an IP environment:
November 2001
Scenarios showing Cisco ONS 15454s in common IP network configurations
Procedures for creating static routes
Procedures for using the Open Shortest Path First (OSPF) protocol
They can be connected to LANs through direct connections or a router.
IP Subnetting can create ONS 15454 node groups, which allow you to provision non-DCC
connected nodes in a network.
Different IP functions and protocols can be used to achieve specific network goals. For example,
Proxy Address Resolution Protocol (ARP) enables one LAN-connected ONS 15454 to serve as a
gateway for ONS 15454s that are not connected to the LAN.
You can create static routes to enable connections among multiple CTC sessions with ONS 15454s
that reside on the same subnet but have different destination IP addresses.
If ONS 15454s are connected to OSPF networks, ONS 15454 network information is automatically
communicated across multiple LANs and WANs.
C H A P T E R
Cisco ONS 15454 Installation and Operations Guide
4
4-1

Advertisement

Table of Contents
loading

Table of Contents